• Replaceable LED module
  • LED drivers included
  • Available in single and double lamp versions
  • Option of 1-10V dimming
  • Ingress protection rating: IP65

Electrical Characteristics

Rated supply voltage 220-240 VAC ±10%
Lamp switching cycles >200,000
Ambient temperature (ta) -20 … +50°C
Driver efficiency up to 90%
Power factor ≥95%
THD <15%
CRI >80
Lumen maintenance (L70) >35K Hrs

LED Modules

Using LED modules has more advantages over LED tubes.

  • LED modules are mounted directly on metal plates. This provides better heat dissipation and lower LED junction temperature
  • Higher efficiency due to removal of LED tube diffuser
  • No blocking for human motion sensor.

LED Drivers

HLT Drivers are used for non-dimming applications. The drivers are characterised by very high reliability and performance.

For dimming applications, HLT 1-10 V Dimming Drivers can be selected. The drivers support industrial standard 1-10V dimming interface.



EN 61347-2-1 Lamp controlgear. Particular requirements for starting devices (other than glow starters)

EN 61347-2-13 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

EN 62384 DC or AC supplied electronic control gear for LED modules. Performance requirements

EN 60598-1 Luminaires. General requirements and tests

EN 60598-2-1 Luminaires. Particular requirements. Specification for fixed general purpose luminaires

EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN 61000-3-2 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

EN 61000-3-3 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

EN 61547 Equipment for general lighting purposes. EMC immunity requirements

Ordering Information

Model Lamp Count Length (mm)
HWD-12 1 660
HWD-14 1 1276
HWD-15 1 1576
HWD-22 2 1320
HWD-24 2 2552
HWD-25 2 3144

※ Add suffix “F” for optional fused terminal blocks

Model Lamp Count Length (mm)
HWD-12A 1 660
HWD-14A 1 1276
HWD-15A 1 1576
HWD-22A 2 1320
HWD-24A 2 2552
HWD-25A 2 3152

※ Add suffix “F” for optional fused terminal blocks